How should the ground infrastructure be planned in conference halls?
The architectural success of conference halls is not just about seat placement, stage layout or lighting system.
The real quality lies under the floor and in the unseen details. It starts. Not only the ground you sit on but also the floor you step on is working properly. is space.
--
Well, How is the ground infrastructure in conference halls? should be planned?
< span>---
1. Floor Slope Angle and Amplifier System is given.
This system is generally called "lecture hall type" inclined floor.
The slope rate is between 5% and 12% depending on the length of the hall. should be planned.
If the slope is not sufficient, loss of visibility in the rear rows
Excessive slope may reduce comfort and pose a safety risk. can create.
< span>---
2. Cable and Technical Infrastructure Channels
Channels should be planned for the sound system, projection, socket connection and security systems under the floor.
These infrastructures are as follows: should include:
PVC pipe for audio and video cables lines
Access to underground socket boxes
HDMI, audio and microphone to the stage cables
Fire detection and emergency Lines falls.
--
3. Vibration and Sound Insulation
If there are pipes, installations or floor transitions passing under the hall, vibration and sound transmission can cause serious problems. It opens. system
Acoustic underfloor insulation layer
Using suspension bearing structures
It is recommended. is prevented.
4. Floor Covering Material Selection
Floor covering in conference halls is not only a visual element.
It also provides echo, cleaning and It is decisive in terms of pedestrian traffic resistance.
Most suitable options:
Acoustic carpet covering: Sound-absorbing and stylish solution
LVT (luxury vinyl tile): Durable, aesthetic and easy cleanable
Acoustic PVC vinyl: Economical and sound control Provides should be.
---
5. Seat Installation Compatible with the Floor
The suitability of the ground infrastructure is vital for seat installation. assembly:
Alignment in rows of seats to damage systems
It causes an unbalanced session that creates a feeling of emptiness. It opens. should be.
6. Ventilation and Electrical Passage Gaps
Some systems that need to be integrated under the floor are also are:
Ventilation vent passages (especially under the platform in areas)
Emergency lighting and guidance connections
Technique with distinction between clean cable and dirty cable routes
These details are drawn during the planning phase. must be processed.
---
Conclusion
Conference The hall floor is not just a surface on which people walk; We plan from the ground up, not from above. It is the hall. has been prepared.
🔍 All content is under copyright protection and is regularly monitored digitally.
💡 Individuals or institutions who want to use the content should contact us. is mandatory.
⚠️ If unauthorized use is detected, legal action will be initiated without delay. Engineering LTD ŞTİ