How to Determine Conference Hall Seat Dimensions and Row Spacing?

One of the most curious topics in conference hall projects is how the seats will be placed and how the row spacing will be determined. These details are of great importance not only in terms of comfort, but also in terms of fire regulations and efficient use of the hall.

Minimum According to Regulations Distances

Due to the current building regulations and fire regulations in Türkiye, there are some mandatory standards in seat placement. Among these, the most important ones are as follows:

Row spacing (between the front seat and the back seat): At least 90 cm is recommended. However, for seats with a writing pad, this distance should be between 95-100 cm. cm.

Row length (seats sitting side by side): Should not exceed 12 seats. If there are more than 12 seats, aisles must be opened at both ends.

Passageways (side aisles): Must be at least 100 cm. This distance should be increased in the corridors leading to the main exits.

Disabled seating areas: At least 1 special area should be reserved for every 200 seats. It is mandatory.

Seat placement and Area One of the most frequently asked questions by customers in living room projects is "How many seats can fit in this area?" is the question. What is important here is not only the square meters of the area, but also the shape of the hall, stage location and access roads.

An approximate calculation is as follows as follows:

Standard conference chair (with armrests, fixed legs): On average, 0.5 - 0.6 m² of space covers.

Layout including row spacing (for each seat): 0.75 - 0.9 m² must be calculated.

For example, a hall with a net seating area of 200 m² can reach an average seat capacity of 220-250. However, this requires project-specific evaluation.

Acoustics and Visibility Layout

Not only the dimensions of the rows of seats, but also their angles to the stage is also important. In halls with flat floors, a sloping floor (ramp) should be planned so that there is a height difference of approximately 2-3 cm in each row. This both increases the viewing comfort and ensures that the rows at the back can see the stage clearly. Mistakes

Some of the most common mistakes made during the project phase are:

The distance between rows is too narrow Leaving planning space for disabled users not to be separated not doing it

These mistakes both reduce the comfort of use and cause serious delays in the licensing processes. It opens.

So nuç

Conference Seat placement in halls is not only about visuality; It should be planned according to regulations, user comfort and security. For this reason, not only the seat model but also technical details such as size, row arrangement and floor slope should be taken into consideration during the project design process; These processes should be carried out by professional teams.

From Nish Global Information

As Nish Global, we manage the entire process from the technical planning of the hall to the seat assembly with engineering discipline, and we deliver each project with a long-lasting system that complies with the regulations. If you would like to get an expert opinion and request a free survey for your salon, you can contact us. Prepared by.

🔍 All content is under copyright protection and is regularly monitored digitally.

💡 Individuals or institutions who want to use the content should contact us. is mandatory.

⚠️ If unauthorized use is detected, legal action will be initiated without delay.

© 2025